BOOKS
[Book 1] Soft Skills in Computer Science and Engineering, CDRSP Knowledge Series, IPLeiria. To be published in 2022. [Book 2] Sustainability and automation in smart construction (2020). Edited by Hugo Rodrigues, Florindo Gaspar, Paulo Fernandes and Artur Mateus, Springer Nature. ISBN 978-3-030-35533-3 (eBook). https://doi.org/10.1007/978-3-030-35533-3 [Book 3] Book of abstracts of the 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization (2018), Edited by Paulo R Fernandes, Joao Manuel R. S. Tavares, Joao Folgado, Carlos Quental, Rui B. Ruben, IDMEC, Lisbon, Portugal. ISBN: 978-989-99424-5-5. [Book 4] Direct Digital Manufacturing for Medicine. Edited by Geoffrey Mitchell and Paula Pascoal-Faria, CDRSP Knowledge Series, PLeiria, 2017. (eBook: ISBN: 978-989-96765-1-0, Printed: ISBN: 978-989-96501-2-1).http://www.iacervo.com/ipl/book_ileio/925293
[Book 5] Non-Destructive Techniques for the Assessment and Preservation of Historic Structures (2017). Edited by Luisa Gonçalves, Hugo Rodrigues & Florindo Gaspar, CRC Press, London, UK, ISBN 9781138710474http://hdl.handle.net/10400.8/3044
[Book 6] The Industrial Challenges of Sustainable Food Packaging (2017). Edited by Geoffrey Mitchell and Paula Faria, IPLeiria – CDRSP Knowledge Series (vol.1), Leiria, ISBN 978-972-8793-55-5. [Book 7] Book of Abstracts: International Conference on Direct Digital Manufacturing and Polymers, CDRSP Knowledge Series Vol. 7, Volume Editors: Geoffrey Mitchell; Paula Pascoal-Faria, Polytechnic of Leiria, May 2021. ISBN 978-989-96765-1-0 (eBook), 978-989-96501-2-1 (Printed)https://cdrsp.ipleiria.pt/icddmap/files/2021/05/booklet-ICDDMAP2021.pdf
BOOK CHAPTERS
[Chapter 1] Annappa, V., Gaspar, F., Mateus, A., & Vitorino, J. (2021). 3D Printing for Construction Using Stone Sludge, pp 121-130, in Sustainability and Automation in Smart Constructions. Advances in Science, Technology & Innovation (IEREK Interdisciplinary Series for Sustainable Development), edited by Rodrigues H., Gaspar F., Fernandes P., Mateus A., Springer.https://doi.org/10.1007/978-3-030-35533-3_16
[Chapter 2] Freire T., Brun F., Mateus A., Gaspar F. (2021). 3D Printing Technology in the Construction Industry, pp 157-167, in Sustainability and Automation in Smart Constructions. Advances in Science, Technology & Innovation (IEREK Interdisciplinary Series for Sustainable Development), edited by Rodrigues H., Gaspar F., Fernandes P., Mateus A., Springer, Chamhttps://doi.org/10.1007/978-3-030-35533-3_19
[Chapter 3] J. Costa, J. Portugal, C.B. Neves, M. Franco, N. Alves, C. Santos, A. Bettencourt (2021). Structural characterization of a chlorhexidine delivery system based on relines resins, In Advances and Current Trends in Biomechanics, Taylor and Francis. ISBN9781003217152https://doi.org/10.1201/9781003217152
[Chapter 4] Conceição, P.R., Pinto, R., Marques, D., Portugal, J., Neves, C.B., Franco, M., Alves, N. (2021), Fit accuracy assessment of RPD metal framework by digital superimposition, In Advances and Current Trends in Biomechanics, Taylor and Francis. ISBN9781003217152https://doi.org/10.1201/9781003217152
[Chapter 5] Conceição, P.R., Peleija, J.P., Portugal, J., Neves, C.B., Franco, M., Alves, N. (2021), Fit accuracy of RPD framework produced by CAD-CAM—pilot clinical trial, In Advances and Current Trends in Biomechanics, Taylor and Francis. ISBN9781003217152https://doi.org/10.1201/9781003217152
[Chapter 6] Dias, J.R., Alves, A.I., Marzia‐Ferreira, C.A., Alves, N.M. (2020). Electrospinning fabrication strategies: from conventional to advanced approaches, chapter 1, in Electrospun Materials and their Allied Applications, edited by Inamuddin, Rajender Boddula, Mohd Imran Ahamed, Abdullah M. Asiri, Wiley-Scrivener, Online ISBN 9781119655039https://doi.org/10.1002/9781119655039.ch1
[Chapter 7] Cristiana Fernandes; Moura, Carla; Rita M.T. Ascenso; Sandra Amado; Nuno Alves; Paula Pascoal-Faria (2020). Comprehensive Review on Full Bone Regeneration through 3D Printing Approaches, chapter 10, in Design Engineering and Manufacturing, edited by Evren Yasa, Mohsen Mhadhbi, Eleonora Santecchia, IntechOpen. ISBN: 978-1-78985-866https://www.intechopen.com/chapters/70809
[Chapter 8] Daniela Trindade; Moura, Carla; David Ângelo; Nuno Alves (2020). Functional Organisation and Associated Dysfunctions of the Temporomandibular Joint, chapter 1, in The Temporomandibular Joint: Structure, function and clinical significance, edited by J. Conrad, Nova Science Publishers. ISBN 978-1-53617-441-0https://doi.org/10.4018/978-1-7998-2963-8.ch001
[Chapter 10] Rodrigues, S., Ferreira, F., Silva, G. (2020). Successful and Unsuccessful routes for entrepreneurs: lessons from an Entrepreneurial Regional Project Program, pp. 81-104, in Handbook of Research on Approaches to Alternative Entrepreneurship Opportunities, edited by J. Dantas, & L. Carvalho, IGI Global. ISBN13: 9781799819813https://doi.org/10.4018/978-1-7998-1981-3.ch005
[Chapter 11] Brun F., Gaspar F., Mateus A., Vitorino J., Diz F. (2020). Experimental Study on 3D Printing of Concrete with Overhangs, pp 778-789, in Second RILEM International Conference on Concrete and Digital Fabrication. DC 2020. RILEM Bookseries, edited by Bos F., Lucas S., Wolfs R., Salet T., Springer. ISBN 978-3-030-49915-0https://doi.org/10.1007/978-3-030-49916-7_77
[Chapter 12] Kariduraganavar, M. Y., Heggannavar, G. B., Amado, S., Mitchell, G. R. (2019). Protein Nanocarriers for Targeted Drug Delivery for Cancer Therapy, chapter 6, In Nano-carriers for Drug Delivery: Nanoscience and Nanotechnology in Drug Delivery, Edited by Shyam S. Mohapatra, Shivendu Ranjan, Nandita Dasgupta, Raghvendra Kumar Mishra, Sabu Thomas, Elsevier, ISBN 978-0-12-814033-8.https://doi.org/10.1016/B978-0-12-814033-8.00006-0
[Chapter 13] Almeida, Henrique A.; Vasco, Joel; Correia, Mário; Ruben, Rui (2019). Layer Thickness Evaluation Between Medical Imaging and Additive Manufacturing, in Lecture Notes in Computational Vision and Biomechanics (vol. 34), Edited by Tavares, João Manuel R. S., Jorge, Renato Natal, Springer Cham, ISBN 978-3-030-32039-3https://doi.org/10.1007/978-3-030-32040-9_71
[Chapter 14] Amado, S., Morouço, P., Faria, P., & Alves, N. (2018). Tailoring Bioengineered Scaffolds for Regenerative Medicine, In Biomaterials in Regenerative Medicine, Edited by Leszek A. Dobrzański, INTECHOPEN Publisher, ISBN 978-953-51-3777-1https://doi.org/10.5772/intechopen.69857
[Chapter 15] Morouço, P. (2018). The usefulness of direct digital manufacturing for biomedical applications, In Intensification of Biobased Processes, Edited by Andrzej Górak, Andrzej Stankiewicz, RSC Publisher, ISBN 978-1-78262-855-2https://doi.org/10.1039/9781788010320-00478
[Chapter 16] Mitchell G., Gaspar, F., Mateus, A., Mahendra, V., Sousa, D. (2018). Advanced Materials from Forests, In Handbook of Ecomaterials, Edited by Leticia Myriam Torres Martínez, Oxana Vasilievna Kharissova, Boris Ildusovich Kharisov, Springer Publisher, ISBN 978-3-319-48281-1.https://doi.org/10.1007/978-3-319-48281-1_189-1
[Chapter 17] Mahadevappa Y. Kariduraganavar, Sandra Amado, Geoffrey R Mitchell (2018). Protein Nanocarriers for Targeted Drug Delivery for Cancer, In Nanocarriers for Drug Delivery: Nanoscience and Nanotechnology in Drug Delivery, Edited by Shyam S. Mohapatra, Shivendu Ranjan, Sabu Thomas, Elsevier Publisher, ISBN 978-0-12-814033-8https://doi.org/10.1016/B978-0-12-814033-8.00006-0
[Chapter 18] Zhgun, A., Gaspar, F., Rodrigues, H. (2018). Pathology of Stone Masonry Buildings: A Case Study at the Batalha Monastery, In Masonry: Design, Materials and Techniques, Edited by Hugo Rodrigues, NovaScience Publisher, ISBN 978-1-53614-532-8https://link.springer.com/chapter/10.1007/978-3-319-71574-2_3
[Chapter 20] Vazão F.; Gaspar F.; Rodrigues H (2017). Survey and Characterization of the Founder’s Chapel Pathologies of the Santa Maria da Vitoria Monastery, Batalha, in Nondestructive Techniques for the Assessment and Preservation of Historic Structures. Edited by L. M. S. Gonçalves, F. Gaspar, H. Rodrigues, CRC Press, ISBN 978-113-8710-47-4.https://www.taylorfrancis.com/books/e/9781315168685/chapters/10.1201/9781315168685-9
[Chapter 21] Gomes T.; Gaspar F.; Rodrigues H. (2017). Characterization of Building Stock and Its Pathologies: Case Study of the Historical City Centre of Leiria, Portugal in Nondestructive Techniques for the Assessment and Preservation of Historic Structures. Edited by L. M. S. Gonçalves, F. Gaspar, H. Rodrigues, CRC Press, ISBN 978-113-8710-47-4https://www.taylorfrancis.com/books/e/9781315168685/chapters/10.1201/9781315168685-2
[Chapter 22] Gonçalves, L.; Gaspar, F.; Rodrigues, H. (2017). Nondestructive Techniques for the Assessment and Preservation of Existent Constructions in Nondestructive Techniques for the Assessment and Preservation of Historic Structures. Edited by L. M. S. Gonçalves, F. Gaspar, H. Rodrigues, CRC Press, ISBN 978-113-8710-47-4https://www.taylorfrancis.com/books/e/9781315168685/chapters/10.1201/9781315168685-1
[Chapter 23] Woodfield, T., Lim, K., Morouço, P., Levato, R., Malda, J., & Melchels, F. (2017). Biofabrication in Tissue Engineering in Comprehensive Biomaterials II, vol. 5.https://doi.org/10.1016/b978-0-12-803581-8.10221-8
[Chapter 24] Morouço, P., D’Aprile, D., Silva, T., Dias, P., Amaro, N., & Marinho, D. (2017). Contribuição dos membros superiores e inferiores para o nado de crol: indicações para a prescrição de treino em jovens nadadores in Treino da Força e Condição Física em Crianças e Jovens (1ª ed.)http://hdl.handle.net/10400.8/2739
PAPERS IN INTERNATIONAL JOURNALS
[Journal paper 1] Batista, C.D., Fernandes, A., Vieira, M.T., Emadinia, O. (2021). From Machining Chips to Raw Material for Powder Metallurgy-A Review, Materials, vol. 14(18), 5432, MDPI.https://doi.org/10.3390/ma14185432
[Journal paper 2] Silva, M.R., Dias-de-Oliveira, J.A., Pereira, A.M., Alves, N.M., Sampaio, Á.M., Pontes, A.J. (2021). Design of Kinematic Connectors for Microstructured Materials Produced by Additive Manufacturing, Polymers, vol. 13(9), 1500, MDPIhttps://doi.org/10.3390/polym13091500
[Journal paper 3] Santos, R.F., Farinha, A.R., Rocha, R., Batista, C., Vieira, M.T. (2021). High‑speed machining tool-steel chips as an outstanding raw material for indirect additive manufacturing?, Results in Materials, 100207, Elsevierhttps://doi.org/10.1016/j.rinma.2021.100207
[Journal paper 4] Valente, J.F.A., Sousa, F., Alves, N. (2021). Additive Manufacturing Tools to Improve the Performance of Chromatographic Approaches, Trends in Biotechnology, vol. 39(10), 970-973, Elsevierhttps://doi.org/10.1016/j.tibtech.2021.03.008
[Journal paper 5] Guerreiro, S.F., Valente, J.F., Dias, J.R., Alves, N. (2021). Box-Behnken Design a Key Tool to Achieve Optimized PCL/Gelatin Electrospun Mesh, Macromolecular Materials and Engineering, vol. 306(4), 2000678, Wileyhttp://dx.doi.org/10.1002/mame.202000678
[Journal paper 6] Silva, J.C., Moura, C.S., Borrecho, G., Alves de Matos, A.P., Cabral, J.M., Linhardt, R.J., Ferreira, F.C. (2021). Effects of glycosaminoglycan supplementation in the chondrogenic differentiation of bone marrow- and synovial- derived mesenchymal stem/stromal cells on 3D-extruded poly (ε-caprolactone) scaffolds, International Journal of Polymeric Materials and Polymeric Biomaterials, vol. 70(3), 207-222, Taylor & Francishttps://doi.org/10.1080/00914037.2019.1706511
[Journal paper 7] Ferreira, C.A., Félix, R., Félix, C., Januário, A.P., Alves, N., Novais, S.C., Dias, J.R., Lemos, M.F. (2021). A Biorefinery Approach to the Biomass of the Seaweed Undaria pinnatifida (Harvey Suringar, 1873): Obtaining Phlorotannins-Enriched Extracts for Wound Healing, Biomolecules, vol. 11(3), 461, MDPIhttps://doi.org/10.3390/biom11030461
[Journal paper 8] Baptista-Silva, S., Borges, S., Costa-Pinto, A.R., Costa, R., Amorim, M., Dias, J.R., Ramos, Ó., Alves, P., Granja, P.L., Soares, R., Pintado, M., Oliveira, A.L. (2021). In situ forming silk sericin-based hydrogel: A novel wound healing biomaterial, ACS Biomaterials Science & Engineering, vol. 7(4), 1573-1586, ACS Publicationshttps://doi.org/10.1021/acsbiomaterials.0c01745
[Journal paper 9] Pires, T., Santos, J., Ruben, R.B., Gouveia, B.P., Castro, A.P., Fernandes, P.R. (2021). Numerical-experimental analysis of the permeability-porosity relationship in triply periodic minimal surfaces scaffolds, Journal of Biomechanics, vol. 117, 110263, Elsevierhttps://doi.org/10.1016/j.jbiomech.2021.110263
[Journal paper 10] Morouço, P., Fernandes, C., Lattanzi, W. (2021). Challenges and innovations in osteochondral regeneration: insights from biology and inputs from bioengineering towards the optimization of tissue engineering strategies, Journal of Functional Biomaterials, vol. 12(1), 17, MDPIhttps://doi.org/10.3390/jfb12010017
[Journal paper 11] Silva, M.R., Pereira, A.M., Sampaio, Á.M., Pontes, A.J. (2021). Assessment of the Dimensional and Geometric Precision of Micro-Details Produced by Material Jetting, Materials, vol. 14(8), 1989, MDPIhttps://doi.org/10.3390/ma14081989
[Journal paper 12] Auriemma, F., de Ballesteros, O.R., Giusto, G., Di Girolamo, R., Malafronte, A., Scoti, M., Rosa, C., Mitchell, G.R. (2021). Time-resolving small angle X-Ray scattering analysis of melt crystallization of mixtures of regular and irregular isotactic polypropylene samples, Polymer, vol. 215, 123411, Elsevierhttps://doi.org/10.1016/j.polymer.2021.123411
[Journal paper 13] Alvites, R.D., Branquinho, M.V., Sousa, A.C., Amorim, I., Magalhães, R., João, F., Almeida, D., Amado, S., Prada, J., Pires, I., Zen, F., Raimondo, S., Luís, A.L., Geuna, S., Varejão, A.S.P., Maurício, A. (2021). Combined use of chitosan and olfactory mucosa mesenchymal stem/stromal cells to promote peripheral nerve regeneration in vivo, Stem cells international, vol. 2021, 6613029, Hindawihttps://doi.org/10.1155/2021/6613029
[Journal paper 14] Rodrigues, H., Vitorino, H., Batalha, N., Sousa, R., Fernandes, P., Varum, H. (2021). Influence of Beam-to-Column Connections in the Seismic Performance of Precast Concrete Industrial Facilities, Structural Engineering International, 1-13, Taylor & Francishttps://doi.org/10.1080/10168664.2021.1920082
[Journal paper 15] Martinho, P.G., Pouzada, A.S. (2021). Alternative materials in moulding elements of hybrid moulds: structural integrity and tribological aspects, International Journal of Advanced Manufacturing Technology, vol. 113(1), 351-363, Springerhttps://doi.org/10.1007/s00170-021-06630-5
[Journal paper 16] Duarte, M.M., Ribeiro, N., Silva, I.V., Dias, J.R., Alves, N.M., Oliveira, A.L. (2021). Fast Decellularization Process Using Supercritical Carbon Dioxide for Trabecular Bone, Journal of Supercritical Fluids, vol. 172, 105194, Elsevierhttp://dx.doi.org/10.1016/j.supflu.2021.105194
[Journal paper 17] Sordini, L., Silva, J.C., Garrudo, F.F.F., Rodrigues, C.A.V., Marques, A.C., Linhardt, R.J., Cabral, J.M.S., Morgado, J., Ferreira, F.C. (2021). PEDOT:PSS-Coated Polybenzimidazole Electroconductive Nanofibers for Biomedical Applications, Polymers, vol. 13(16), 2786, MDPIhttps://doi.org/10.3390/polym13162786
[Journal paper 18] Ângelo, D.F., Araújo, R.A.D., Sanz, D. (2021). Surgical complications related to temporomandibular joint arthroscopy: a prospective analysis of 39 single-portal versus 43 double-portal procedures, International Journal of Oral and Maxillofacial Surgery, vol. 50(8), 1089-1094, Elsevierhttps://doi.org/10.1016/j.ijom.2020.07.020
[Journal paper 19] Lopes, P. A., Fernandes, D. F., Silva, A. F., Marques, D. G., de Almeida, A. T., Majidi, C., & Tavakoli, M. (2021). Bi-Phasic Ag–In–Ga-Embedded Elastomer Inks for Digitally Printed, Ultra-Stretchable, Multi-layer Electronics. ACS Applied Materials & Interfaces, 13(12), 14552–14561https://doi.org/10.1021/acsami.0c22206
[Journal paper 20] A. Pires Miranda Ferreira da Silva, Hugo Paisana, Tâ, J. Góis, A. Serra, J. F. J. Coelho, A. de Almeida, C. Majidi, M. Tavakoli, High Resolution Soft and Stretchable Circuits with PVA/Liquid‐Metal Mediated Printing, Advanced Materials Technologies, 2020https://doi.org/10.1002/admt.202000343
[Journal paper 21] J. Alberto, C. Leal, Clá, P. Lopes, Hugo Paisana, A. de Almeida, M. Tavakoli, Fully Untethered Battery-free Biomonitoring Electronic Tattoo with Wireless Energy Harvesting, Scientific Reports, 5539, 2020https://doi.org/10.1038/s41598-020-62097-6
[Journal paper 22] Moura, C., Trindade, D., Vieira, M., Francisco, L., Ângelo, D.F., Alves, N. (2020). Multi-Material Implants for Temporomandibular Joint Disc Repair: Tailored Additive Manufacturing Production, Frontiers in Bioengineering and Biotechnology, vol. 8, 342, Frontiers Media S.A.https://doi.org/10.3389/fbioe.2020.00342
[Journal paper 23] Reboleira, J., Adão, P., Guerreiro, S.F., Dias, J.R., Ganhão, R., Mendes, S., Andrade, M., Vilarinho, F., Sanches-Silva, A., Mateus, A., Alves, N., Bernardino, S. (2020). Poultry Shelf-Life Enhancing Potential of Nanofibers and Nanoparticles Containing Porphyra dioica Extracts, Coatings, vol. 10(4), 315, MDPIhttps://doi.org/10.3390/coatings10040315
[Journal paper 24] Gkourmpis, T., Mitchell, G.R. (2020). The Use of Scattering Data in the Study of the Molecular Organisation of Polymers in the Non-Crystalline State, Polymers, vol. 12(12), 2917, MDPIhttps://doi.org/10.3390/polym12122917
[Journal paper 25] Bartolomeu, F., Costa, M.M., Alves, N., Miranda, G., Silva, F.S. (2020). Additive manufacturing of NiTi-Ti6Al4V multi-material cellular structures targeting orthopedic implants, Optics and Lasers in Engineering, vol. 134, 106208, Elsevierhttps://doi.org/10.1016/j.optlaseng.2020.106208
[Journal paper 26] Pereira, T., Barroso, S., Mendes, S., Amaral, R.A., Dias, J.R., Baptista, T., Saraiva, J.A., Alves, N.M., Gil, M.M. (2020). Optimization of phycobiliprotein pigments extraction from red algae Gracilaria gracilis for substitution of synthetic food colorants, Food Chemistry, vol. 321, 126688, Elsevierhttps://doi.org/10.1016/j.foodchem.2020.126688
[Journal paper 27] Bartolomeu, F., Costa, M.M., Alves, N., Miranda, G., Silva, F.S. (2020). Engineering the elastic modulus of NiTi cellular structures fabricated by selective laser melting, Journal of the Mechanical Behavior of Biomedical Materials, vol. 110, 103891, Elsevierhttps://doi.org/10.1016/j.jmbbm.2020.103891
[Journal paper 28] Martins-Ferreira, N., Montoli, A., Patchkoria, A., Sobral, M. (2020). On the classification of Schreier extensions of monoids with non-abelian kernel, Forum Mathematicum, vol. 32(3), 607-623, Degruyterhttps://doi.org/10.1515/forum-2019-0164
[Journal paper 29] Dias, J.R., Ribeiro, N., Baptista-Silva, S., Costa-Pinto, A.R., Alves, N., Oliveira, A.L. (2020). In situ Enabling Approaches for Tissue Regeneration: Current Challenges and New Developments, Frontiers in Bioengineering and Biotechnology, vol. 8, 85, Frontiers Media S.A.https://doi.org/10.3389/fbioe.2020.00085
[Journal paper 30] Amorim, P.H., Moraes, T.F., Silva, J.V., Pedrini, H., Ruben, R.B. (2020). Reconstruction of Panoramic Dental Images Through Bézier Function Optimization, Frontiers in Bioengineering and Biotechnology, vol. 8, 794, Frontiers Media S.A.http://dx.doi.org/10.3389/fbioe.2020.00794
[Journal paper 31] Valente, J.F.A., Sousa, A., Azevedo, G.A., Queiroz, J.A., Sousa, F. (2020). Purification of supercoiled p53-encoding plasmid using an arginine-modified macroporous support, Journal of Chromatography A, vol. 1618, 460890, Elsevierhttps://doi.org/10.1016/j.chroma.2020.460890
[Journal paper 32] Valente, J.F.A., Queiroz, J.A., Sousa, F. (2020). Dilemma on plasmid DNA purification: binding capacity vs selectivity, Journal of Chromatography A, vol. 1637, 461848, Elsevierhttps://doi.org/10.1016/j.chroma.2020.461848
[Journal paper 33] Bartolomeu, F., Dourado, N., Pereira, F., Alves, N., Miranda, G., Silva, F.S. (2020). Additive manufactured porous biomaterials targeting orthopedic implants: A suitable combination of mechanical, physical and topological properties, Materials Science and Engineering: C, vol. 107, 110342, Elsevierhttps://doi.org/10.1016/j.msec.2019.110342
[Journal paper 34] Premakshi, H.G., Kariduraganavar, M.Y., Mitchell, G.R. (2020). Crosslinked Nanocomposite Sodium Alginate-Based Membranes with Titanium Dioxide for the Dehydration of Isopropanol by Pervaporation, Molecules, vol. 25(6), 1298, MDPIhttps://doi.org/10.3390/molecules25061298
[Journal paper 35] Silva, J.C., Moura, C.S., Borrecho, G., de Matos, A.P.A., da Silva, C.L., Cabral, J.M., Bártolo, P.J., Linhardt, R.J., Ferreira, F.C. (2020). Extruded Bioreactor Perfusion Culture Supports the Chondrogenic Differentiation of Human Mesenchymal Stem/Stromal Cells in 3D Porous Poly(ε-Caprolactone) Scaffolds, Biotechnology Journal, vol. 15(2), 1900078, Wileyhttps://doi.org/10.1002/biot.201900078
[Journal paper 36] Derdar H., Mitchell G.R., Mahendra V.S., Benachour M., Haoue S., Cherifi Z., Bachari K., Harrane A., Meghabar R. (2020). Green Nanocomposites from Rosin-Limonene Copolymer and Algerian Clay, Polymers, vol. 12(9), 1971, MDPIhttps://doi.org/10.3390/polym12091971
[Journal paper 37] Solla, M., Gonçalves, L., Gonçalves, G., Francisco, C., Puente, I., Providência, P., Florindo, G., Rodrigues, H. (2020). A building information modeling approach to integrate geomatic data for the documentation and preservation of cultural heritage, Remote Sensing, vol. 12(24), 4028, MDPIhttps://doi.org/10.3390/rs12244028
[Journal paper 38] Martins-Ferreira, N. (2020). A Unified Classification Theorem for Mal’tsev-Like Categories, Applied Categorical Structures, vol. 28(2), 323-338, Springerhttps://doi.org/10.1007/s10485-019-09580-y
[Journal paper 39] Audenaert, E.A., Van den Eynde, J., de Almeida, D.F., Steenackers, G., Vandermeulen, D., Claes, P. (2020). Separating positional noise from neutral alignment in multicomponent statistical shape models, Bone Reports, vol. 12, 100243, Elsevierhttps://doi.org/10.1016/j.bonr.2020.100243
[Journal paper 40] Silva, J.C., Carvalho, M.S., Udangawa, R.N., Moura, C.S., Cabral, J.M.S., L da Silva, C., Ferreira, F.C., Vashishth, D., Linhardt, R.J. (2020). Extracellular matrix decorated polycaprolactone scaffolds for improved mesenchymal stem/stromal cell osteogenesis towards a patient-tailored bone tissue engineering approach, Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 108(5), 2153-2166, Wileyhttps://doi.org/10.1002/jbm.b.34554
[Journal paper 41] Moura, C.S., Silva, J.C., Faria, S., Fernandes, P.R., da Silva, C.L., Cabral, J.M.S., Linhardt, R., Bártolo, P.J., Ferreira, F.C. (2020). Chondrogenic differentiation of mesenchymal stem/stromal cells on 3D porous poly (ε-caprolactone) scaffolds: Effects of material alkaline treatment and chondroitin sulfate supplementation, Journal of Bioscience and Bioengineering, vol. 129(6), 756-764, Elsevierhttps://doi.org/10.1016/j.jbiosc.2020.01.004
[Journal paper 42] Pattanashetti, N.A., Viana, T., Alves, N., Mitchell, G.R., Kariduraganavar, M.Y. (2020). Development of novel 3D scaffolds using BioExtruder by varying the content of hydroxyapatite and silica in PCL matrix for bone tissue engineering, Journal of Polymer Research, vol. 27(4), 1-13, Springerhttps://doi.org/10.1007/s10965-020-02053-0
[Journal paper 43] Figueiredo, L., Fonseca, R., Pinto, L.F.V., Ferreira, F.C., Almeida, A., Rodrigues, A. (2020). Strategy to improve the mechanical properties of bioabsorbable materials based on chitosan for orthopedic fixation applications, Journal of the Mechanical Behavior of Biomedical Materials, vol. 103, 103572, Elsevierhttps://doi.org/10.1016/j.jmbbm.2019.103572
[Journal paper 44] Carreira, P., Cerejo, F., Alves, N., Vieira, M.T. (2020). In Search of the Optimal Conditions to Process Shape Memory Alloys (NiTi) Using Fused Filament Fabrication (FFF), Materials, vol. 13(21), 4718, MDPIhttps://doi.org/10.3390/ma13214718
[Journal paper 45] Zaoui, A., Mahendra, V., Mitchell, G., Cherifi, Z., Harrane, A., Belbachir, M. (2020). Design, Synthesis and Thermo-chemical Properties of Rosin Vinyl Imidazolium Based Compounds as Potential Advanced Biocompatible Materials, Waste and Biomass Valorization, vol. 11(7), 3723-3730, Springerhttps://doi.org/10.1007/s12649-019-00691-0
[Journal paper 46] Derdar, H., Mitchell, G.R., Cherifi, Z., Belbachir, M., Benachour, M., Meghabar, R., Bachari, K., Harrane, A. (2020). Ultrasound Assisted Synthesis of Polylimonene and Organomodified-clay Nanocomposites: A Structural, Morphological and Thermal Properties, Bulletin of Chemical Reaction Engineering & Catalysis, vol. 15(3), 798-807, Universitas Diponegorohttps://doi.org/10.9767/bcrec.15.3.9185.798-807
[Journal paper 47] Meneses, J., Silva, J.C., Fernandes, S.R., Datta, A., Ferreira, F.C., Moura, C., Amado, S., Alves, N., Pascoal-Faria, P. (2020). A Multimodal Stimulation Cell Culture Bioreactor for Tissue Engineering: A Numerical Modelling Approach, Polymers, vol. 12(4), 940, MDPIhttps://doi.org/10.3390/polym12040940
[Journal paper 48] Morouço, P., Azimi, B., Milazzo, M., Mokhtari, F., Fernandes, C., Reis, D., Danti, S. (2020). Four-Dimensional (Bio-) printing: A Review on Stimuli-Responsive Mechanisms and Their Biomedical Suitability, Applied Sciences, vol. 10(24), 9143, MDPIhttps://doi.org/10.3390/app10249143
[Journal paper 49] Vincze, G., Simões, F.J.P., Butuc, M.C. (2020). Asymmetrical Rolling of Aluminum Alloys and Steels: A Review, Metals, vol. 10(9), 1126, MDPIhttps://doi.org/10.3390/met10091126
[Journal paper 50] Luciano De Sio, Bin Ding, Monica Focsan, Karin Kogermann, Paula Pascoal-Faria, Francesca Petronela, Geoffrey Mitchell, Eyal Zussman, Filippo Pierin (2020). Personalized Reusable Face Masks with Smart Nano-Assisted Destruction of Pathogens for COVID-19: A Visionary Road, Chemistry – A European Journal, vol. 27, 6112, Wileyhttps://doi.org/10.1002/chem.202004875
[Journal paper 51] Francisca Carvalho, P. Lopes, M. Reis Carneiro, A. Serra, J. F. J. Coelho, A. de Almeida, M. Tavakoli, Nondrying, sticky hydrogels for the next generation of high-resolution conformable bioelectronics, ACS Applied Electronic Materials, 2, 10, 3390–3401, 2020https://doi.org/10.1021/acsaelm.0c00653
[Journal paper 52] J. Alberto, F. J. T. E. Ferreira, A. de Almeida, Study of a linear actuator with a hybrid core using sensorless position control, Sensors and Actuators, A: Physical, 305, 2020https://doi.org/10.1016/j.sna.2020.111919
[Journal paper 53] C. Leal, P. Lopes, A. Serra, J. F. J. Coelho, A. de Almeida, M. Tavakoli, Untethered Disposable Health Monitoring Electronic Patches with an Integrated Ag2O–Zn Battery, a AgInGa Current Collector, and Hydrogel Electrodes, ACS Applied Materials and Interfaces, 12, 3, 3407–3414, 2020https://doi.org/10.1021/acsami.9b18462
[Journal paper 54] P. Lopes, A. de Almeida, M. Tavakoli, Reliable interfaces for EGaIn multi-layer stretchable circuits and microelectronics, Lab on a Chip, 19(5), 897-906, 2019https://doi.org/10.1039/C8LC01093E
[Journal paper 55] Moura, Carla; Santos-Rocha, Rita; Franco, Susana; Malça, Cândida; Galhano, Cristina; Henriques, Marta; Morouço, Pedro (2019). A Brief Review on Processes for Cartilage Repair, Applied Mechanics and Materials, vol. 890, 229-236, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.229
[Journal paper 56] Diana A. Fonseca, Fábio Simões (2019). Direct Digital Manufacturing in the Context of a Circular Economy, Applied Mechanics and Materials, vol. 890, 21-33, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.21
[Journal paper 57] Pascoal-Faria, Paula; Castelo Ferreira, Pedro; Datta, Abhishek; Amado, Sandra; Moura, Carla; Alves, Nuno (2019). Electrical Stimulation Optimization in Bioreactors for Tissue Engineering Applications, Applied Mechanics and Materials, vol. 890, 314-323, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.314
[Journal paper 58] Pedro Castelo Ferreira; Paula Pascoal-Faria; Pedro Carreira; Nuno Alves (2019). A Computer Simulation of the Nitinol Thermal Expansion under Fast Varying Working Conditions, Applied Mechanics and Materials, vol. 890, 162-173, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.162
[Journal paper 59] Gaspar, M., Pascoal-Faria, P., Amado, S., & Alves, N. (2019). A Computer Tool for 3D Shape Recovery of Fruits, Applied Mechanics and Materials, vol. 890, 181-189, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.181
[Journal paper 60] Viana, T., Biscaia, S., Dabrowska, E., Franco, M. C., Carreira, P., Morouço, P., & Alves, N. (2019). A novel biomanufacturing system to produce multi-material scaffolds for tissue engineering: Concept and preliminary results, Applied Mechanics and Materials, vol. 890, 283-289, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.283
[Journal paper 61] Geoffrey Robert, Mitchell (2019). Adaptive Platforms and Flexible Deposition System for Big Area Additive Manufacturing (BAAM), Applied Mechanics and Materials, vol. 890, 3-20, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.3
[Journal paper 62] Vasconcelos, I., Pereira, M. R., Ginjeira, A., Franco, M. C., Morouço, P., & Alves, N. (2019). Evaluation of Root Canal Filling with a Bioceramic Sealer Using Micro-Computed Tomography: A Pilot Study, Applied Mechanics and Materials, vol. 890, 275-282, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.275
[Journal paper 63] Ferreira, V. and Lisboa, A. (2019). Innovation and Entrepreneurship: from Schumpeter to Industry 4.0, Applied Mechanics and Materials, vol. 890, 174-180, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.174
[Journal paper 64] Koutsonas, S., Mitchell, G. R., & Davis, F. J. (2019). Microwave treatment of polyacrylonitrile powder method development and effects of surface modification porosity for supercapacitor devices or other mobile applications, Applied Mechanics and Materials, vol. 890, 146-154, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.146
[Journal paper 65] Gomes, S., Pascoal-Faria, P., Mitchell, G. R., Gkourmpis, T., & Youngs, T. (2019). Numerical Thermal Analysis of a T Jump System Used for Studying Polymer Behaviour, Applied Mechanics and Materials, vol. 890, 155-161, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.155
[Journal paper 66] Mitchell, G. R., Pratumshat, S., & Olley, R. (2019). Polyethylene and the Nucleating Agent: Dibenzylidene Sorbitol, a Neutron Scattering Study, Applied Mechanics and Materials, vol. 890, 199-204, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.199
[Journal paper 67] Sousa, D., Biscaia, S., Viana, T., Gaspar, M., Mahendra, V., Mohan, S. D., … & Mitchell, G. R. (2019). Rosin Based Composites for Additive Manufacturing, Applied Mechanics and Materials, vol. 890, 70-76, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.70
[Journal paper 68] Rui Silva; Ivo Santos Dimas; Justin W. Fernandez; Nuno Alves; Pedro Morouço; Ana Colette Maurício; António Veloso; Sandra Amado (2019). Sheep Gait Biomechanics and the Assessment of Musculoskeletal Conditions: A Systematic Review, Applied Mechanics and Materials, vol. 890, 248-259, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.248
[Journal paper 69] Fernandes, C., Heggannavar, G. B., Kariduraganavar, M. Y., Mitchell, G. R., Alves, N., & Morouço, P. (2019). Smart Materials for Biomedical Applications: The Usefulness of Shape-Memory Polymers, Applied Mechanics and Materials, vol. 890, 237-247, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.237
[Journal paper 70] Heggannavar, G. B., Achari, D., Fernandes, C., Mitchell, G. R., Morouço, P., & Kariduraganavar, M. Y. (2019). Smart polymers in drug delivery applications, Applied Mechanics and Materials, vol. 890, 324-339, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.324
[Journal paper 71] Khan, I., Kamma-Lorger, C. S., Mohan, S. D., Mateus, A., & Mitchell, G. R. (2019). The Exploitation of Polymer Based Nanocomposites for Additive Manufacturing: A Prospective Review, Applied Mechanics and Materials, vol. 890, 113-145, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.113
[Journal paper 72] Brites, Fernando; Malça, Cândida; Gaspar, Florindo; Horta, João F.; Franco, Margarida C.; Biscaia, Sara; Mateus, Artur (2019). The Use of Polypropylene and High-Density Polyethylene on Cork Plastic Composites for Large Scale 3D Printing, Applied Mechanics and Materials, vol. 890, 205-225, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.205
[Journal paper 73] Nelson Martins-Ferreira; Nuno Alves; Geoffrey R. Mitchell (2019). Towards a Conceptual Notion for a Universal Printing Machine, Applied Mechanics and Materials, vol. 890, 61-69, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.61
[Journal paper 74] Franco, M. C., Fonseca, R., Gomes, S., Biscaia, S., Brites, F., Pascoal-Faria, P., & Mateus, A. (2019). Traffic Vertical Signposting: Materials Characterization and Structural Numerical Simulation, Applied Mechanics and Materials, vol. 890, 190-198, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.190
[Journal paper 75] Silva, M.R., Domingues, J., Costa, J., Mateus, A., Malça, C. (2019). Study of Metal/Polymer Interface of Parts Produced by a Hybrid Additive Manufacturing Approach, Applied Mechanics and Materials, vol. 890, 34-42, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.34
[Journal paper 76] Freitas, P., Santos, C., Carreira, P., Mateus, A. (2019). High Efficiency Cooling and Heating Channels for Injection Moulding, Applied Mechanics and Materials, vol. 890, 43-53, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.43
[Journal paper 77] Vitorino, J., Ribeiro, E., Silva, R., Santos, C., Carreira, P., Mitchell, G., Mateus, A. (2019). Industry 4.0 – Digital Twin Applied to Direct Digital Manufacturing, Applied Mechanics and Materials, vol. 890, 54-60, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.54
[Journal paper 78] Mahendra, V. (2019). Rosin Product Review, Applied Mechanics and Materials, vol. 890, 77-91, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.77
[Journal paper 79] Mohan, S.D., Nazhipkyzy, M., Carreira, P., Santos, C., Davis, F.J., Mateus, A., Mitchell, G. (2019). Direct Digital Manufacturing of Nanocomposites, Applied Mechanics and Materials, vol. 890, 92-97, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.92
[Journal paper 80] Baptista, C., Martins, G., Santos, C., Mateus, A., Antunes, F. (2019). Microstructure of Thermoplastic Composites Reinforced with Wool and Wood, Applied Mechanics and Materials, vol. 890, 98-112, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.98
[Journal paper 81] Silva, A. R., Carreira, P., Santos, C., Reis, M., Mateus, A. (2019). I. Film: Using Electrospinning to Create Bioactive Films, Applied Mechanics and Materials, vol. 890, 260-267, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.260
[Journal paper 82] Reis, D., Biscaia, S., Seabra, I. J., Veloso, A., Morouço, P. (2019). Fabrication of Poly(Glycerol Sebacate)-Poly(ε-Caprolactone) Extrusion-Based Scaffolds for Cartilage Regeneration, Applied Mechanics and Materials, vol. 890, 268-174, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.268
[Journal paper 83] Lopes, J., Fonseca, R., Viana, T., Fernandes, C., Morouço, P., Moura, C., Biscaia, S. (2019). Characterization of Biocompatible Poly(Ethylene Glycol)-Dimethacrylate Hydrogels for Tissue Engineering, Applied Mechanics and Materials, vol. 890, 290-300, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.290
[Journal paper 84] Gordo, J. J., Pascoal-Faria, P., Mateus, A., Morouço, P., Schiriati, V., Amado, S. (2019). Biomechanical Outcomes Related with Gait in Children with Cerebral Palsy Using Ankle-Foot Orthotic – A Systematic Review, Applied Mechanics and Materials, vol. 890, 301-313, Trans Tech Publicationshttps://doi.org/10.4028/www.scientific.net/AMM.890.301
[Journal paper 85] Azevedo, G.M.; Valente, J.F.A.; Sousa, A.; Pedro, A.Q.; Pereira, P.; Sousa, F.; Queiroz, J.A. (2019). Effect of Chromatographic Conditions on Supercoiled Plasmid DNA Stability and Bioactivity, Applied Sciences, vol. 9(23): 5170, MDPIhttps://doi.org/10.3390/app9235170
[Journal paper 86] Saba Abdulghani; Geoffrey Mitchell (2019). Biomaterials for In Situ Tissue Regeneration: A Review, Biomolecules, vol. 9(11): 750, MDPIhttps://doi.org/10.3390/biom9110750
[Journal paper 87] J. P. Fatelo and N. Martins-Ferreira (2019). Mobi algebra as an abstraction to the unit interval and its comparison to rings, Communications in algebra, vol. 47(3): 1197-1214, Taylor&Francishttps://doi.org/10.1080/00927872.2018.1501575
[Journal paper 88] A. P. G. Castro; R. B. Ruben; S. B. Gonçalves; J. Pinheiro; J. M. Guedes; P. R. Fernandes (2019). Numerical and experimental evaluation of TPMS Gyroid scaffolds for bone tissue engineering, Computer Methods in Biomechanics and Biomedical Engineering, vol. 22(6): 567-573, Taylor&Francishttps://doi.org/10.1080/10255842.2019.1569638
[Journal paper 89] Aliaksandr Bakatovich; Florindo Gaspar (2019). Composite material for thermal insulation based on moss raw material, Construction and Building Materials, vol. 228, 116699, Elsevierhttps://doi.org/10.1016/j.conbuildmat.2019.116699
[Journal paper 90] Morouço, P.G., Gil, J.F. (2019). Four-Dimensional Bioprinting for Regenerative Medicine: Mechanisms to Induce Shape Variation and Potential Applications, EMJ Innov., vol. 3(1): 36-43. [Journal paper 91] Morouço, P., Fernandes, C., & Santos-Rocha, R. (2019). Osteoarthritis, Exercise and Tissue Engineering: a stimulating triad for health professionals, Journal of Aging Research, vol. 2019, Hindawihttps://doi.org/10.1155/2019/1935806
[Journal paper 92] V Infante; JFA Madeira; Rui B Ruben; F Moleiro; Sofia Teixeira de Freitas (2019). Characterization and optimization of hybrid carbon–glass epoxy composites under combined loading, Journal of Composite Materials, vol. 53(18): 2593-2605, SAGE journalshttps://doi.org/10.1177/0021998319834673
[Journal paper 93] Silva, Miguel Reis; Pereira, António M.; Alves, Nuno; Mateus, Gonçalo; Mateus, Artur; Malça, Cândida (2019). Development of an additive manufacturing system for the deposition of thermoplastics impregnated with carbon fibers, Journal of Manufacturing and Materials Processing, vol. 3(2): 35, MDPIhttps://doi.org/10.3390/jmmp3020035
[Journal paper 94] G. Miranda; S. Faria; F. Bartolomeu; E. Pinto; N. Alves; N. Peixinho; M. Gasik; F.S. Silva (2019). A study on the production of thin-walled Ti6Al4V parts by selective laser melting, Journal of Manufacturing Processes, vol. 39: 346-355, Elsevierhttps://doi.org/10.1016/j.jmapro.2018.12.036
[Journal paper 95] Abdulghani, S., Morouço, P.G. (2019). Biofabrication for osteochondral tissue regeneration: bioink printability requirements, Journal of Materials Science: Materials in Medicine, vol. 30: 20, Springerhttps://doi.org/10.1007/s10856-019-6218-x
[Journal paper 96] Clementino, M. M., Martins-Ferreira, N., & Montoli, A. (2019). On the categorical behaviour of preordered groups, Journal of Pure and Applied Algebra, vol. 223(10): 4226-4245, Elsevierhttps://doi.org/10.1016/j.jpaa.2019.01.006
[Journal paper 97] Bartolomeu, F., Buciumeanu, M., Costa, MM., Alves, N., Gasik, M., Silva, FS., Miranda, G. (2019). Multi-material Ti6Al4V & PEEK cellular structures produced by Selective Laser Melting and Hot Pressing: a tribocorrosion study targeting orthopedic applications, Journal of the Mechanical Behavior of Biomedical Materials, vol. 89: 54-64, Elsevierhttps://doi.org/10.1016/j.jmbbm.2018.09.009
[Journal paper 98] Bartolomeu, F.; Fonseca, J.; Peixinho, N.; Alves, N.; Gasik, M.; Silva, F.S.; Miranda, G. (2019). Predicting the output dimensions, porosity and elastic modulus of additive manufactured biomaterial structures targeting orthopedic implants, Journal of the Mechanical Behavior of Biomedical Materials, vol. 99(): 104-117, Elsevierhttps://doi.org/10.1016/j.jmbbm.2019.07.023
[Journal paper 99] M.M. Costa; F. Bartolomeu; N. Alves; F.S. Silva; G. Miranda (2019). Tribological behavior of bioactive multi-material structures targeting orthopedic applications, Journal of the Mechanical Behavior of Biomedical Materials, vol. 94: 193-200, Elsevierhttps://doi.org/10.1016/j.jmbbm.2019.02.028
[Journal paper 100] M.M. Costa; R. Lima; F. Melo-Fonseca; F. Bartolomeu; N. Alves; A. Miranda; M. Gasik; F.S. Silva; N.A: Silva; G. Miranda (2019). Development of ß-TCP-Ti6Al4V structures: Driving cellular response by modulating physical and chemical properties, Materials Science and Engineering: C, vol. 98: 705-716, Elsevierhttps://doi.org/10.1016/j.msec.2019.01.016
[Journal paper 101] Ricardo Serôdio; Sónia L Schickert; Ana R Costa-Pinto; Dias, Juliana; Pedro L Granja; Fang Yang; Ana L Oliveira (2019). Ultrasound sonication prior to electrospinning tailors silk fibroin/PEO membranes for periodontal regeneration, Materials Science and Engineering: C, vol. 98: 969-981, Elsevierhttps://doi.org/10.1016/j.msec.2019.01.055
[Journal paper 102] Pattanashetti, Nandini A.; Biscaia, Sara; Moura, Carla; Mitchell, Geoffrey R.; Kariduraganavar, Mahadevappa Y. (2019). Development of novel 3D scaffolds using BioExtruder by the incorporation of silica into polycaprolactone matrix for bone tissue engineering, Materials Today Communications, vol. 21: 100651, Elsevierhttps://doi.org/10.1016/j.mtcomm.2019.100651
[Journal paper 103] Nolasco, P.; Coelho, P.V.; Coelho, C.; Angelo, D.F.; Dias, J.R.; Alves, N.M.; Maurício, A.; Pereira, M.F.C.; Matos, A.P.A.; Martins, R.C.; Carvalho, P.A. (2019). Mineralization of Sialoliths Investigated by Ex Vivo and In Vivo X-ray Computed Tomography, Microscopy and Microanalysis, vol. 25(1): 151-163, Microscopy Society of Americahttps://doi.org/10.1017/S1431927618016124
[Journal paper 103] Nolasco, P.; Coelho, P.V.; Coelho, C.; Angelo, D.F.; Dias, J.R.; Alves, N.M.; Maurício, A.; Pereira, M.F.C.; Matos, A.P.A.; Martins, R.C.; Carvalho, P.A. (2019). Mineralization of Sialoliths Investigated by Ex Vivo and In Vivo X-ray Computed Tomography, Microscopy and Microanalysis, vol. 25(1): 151-163, Microscopy Society of Americahttps://doi.org/10.1017/S1431927618016124
[Journal paper 104] J.F.A. Valente; J.R. Dias; A. Sousa; N. Alves (2019). Composite Central Face Design-An Approach to Achieve Efficient Alginate Microcarriers, Polymers, vol. 11(12): 1949, MDPIhttps://doi.org/10.3390/polym11121949
[Journal paper 105] António M.H. Pereira; Miguel R. Silva; Mercedes A.G. Domingues; José C. Sá (2019). Lean Six Sigma Approach to Improve the Production Process in the Mould Industry: a Case Study, Quality Innovation Prosperity, vol. 23(3)https://doi.org/10.12776/qip.v23i3.1334
[Journal paper 106] Costa, M. M., Dantas, T. A., Bartolomeu, F., Alves, N., Silva, F. S., Miranda, G., & Toptan, F. (2019). Corrosion behaviour of PEEK or ß-TCP-impregnated Ti6Al4V SLM structures targeting biomedical applications, Transactions of Nonferrous Metals Society of China (English Edition), vol. 29(12): 2523-2533, Elsevierhttps://doi.org/10.1016/S1003-6326(19)65160-5
[Journal paper 107] F. Bartolomeu; M.M. Costa; J.R. Gomes; N. Alves; C.S. Abreu; F.S. Silva; G. Miranda (2019). Implant surface design for improved implant stability – A study on Ti6Al4V dense and cellular structures produced by Selective Laser Melting, Tribology International, vol. 129: 272-282, Elsevierhttps://doi.org/10.1016/j.triboint.2018.08.012
[Journal paper 108] F. Bartolomeu; C.S. Abreu; C.G. Moura; M.M. Costa; N. Alves; F.S. Silva; G. Miranda (2019). Ti6Al4V-PEEK multi-material structures – design, fabrication and tribological characterization focused on orthopedic implants, Tribology International, vol. 131: 672-678, Elsevierhttps://doi.org/10.1016/j.triboint.2018.11.017
[Journal paper 109] C. Leal, P. Lopes, A. Serra, J. F. J. Coelho, A. de Almeida, M. Tavakoli, Untethered Disposable Health Monitoring Electronic Patches with Integrated Ag2O-Zn Battery, AgInGa Current Collector and Hydrogel Electrodes, ACS Applied Materials & Interfaces, 2019https://doi.org/10.1021/acsami.9b18462
[Journal paper 110] P. Lopes, C. Majidi, D. Vaz Gomes, D. Green Marques, P. Faia, J. Góis, T. Patricio, J. F. J. Coelho, A. Serra, A. de Almeida, Soft Bioelectronic Stickers: Selection and Evaluation of Skin‐Interfacing Electrodes , Advanced Healthcare Materials, 8(15), 1900234, 2019https://doi.org/10.1002/adhm.201900234
[Journal paper 111] H. Paisana, A. de Almeida, M. Tavakoli, Hydroprinted Electronics: Ultrathin Stretchable Ag-In-Ga E-Skin for Bioelectronics & Human-Machine Interaction, ACS Applied Materials and Interfaces, 10 (45), 38760-38768, 2018.https://doi.org/10.1021/acsami.8b13257
[Journal paper 112] P. Lopes, H. Paisana, A. de Almeida, C. Majidi, M. Tavakoli, Hydroprinted Electronics: Ultrathin Stretchable Ag-In-Ga E-Skin for Bioelectronics and Human-Machine Interaction, ACS Applied Materials and Interfaces, 10(45), pp. 38760-38768, 2018https://doi.org/10.1021/acsami.8b13257
[Journal paper 113] DF Fernandes, C Majidi, M Tavakoli, Digital Printing of Stretchable Electronics: A Review, Material Chemistry C, 7, 14035—14068https://doi.org/10.1039/C9TC04246F
[Journal paper 114] M Tavakoli, MH Malakooti, et. al., EGaIn‐Assisted Room‐Temperature Sintering of Silver Nanoparticles for Stretchable, Inkjet‐Printed, Thin‐Film Electronics, Advanced Materials, 30(29), 1801852https://doi.org/10.1002/adma.201801852
[Journal paper 115] H. Paisana, A. de Almeida, M. Tavakoli, Hydroprinted Electronics: Ultrathin Stretchable Ag-In-Ga E-Skin for Bioelectronics & Human-Machine Interaction, ACS Applied Materials and Interfaces, 10 (45), 38760-38768, 2018https://doi.org/10.1021/acsami.8b13257
[Journal paper 116] Melo-Fonseca, F., Lima, R., Costa, MM., Bartolomeu, F., Alves, N., Miranda, A., Gasik, M., Silva, FS., Miranda, G. (2018). 45S5 BAG-Ti6Al4V structures: The influence of the design on some of the physical and chemical interactions that drive cellular response, Materials & Design 160, 95-105https://doi.org/10.1016/j.matdes.2018.08.056
[Journal paper 117] M. Tavakoli, C. Benussi, P. Lopes, L. Osório, A. de Almeida, Robust hand gesture recognition with a double channel surface EMG wearable armband and SVM classifier, Biomedical Signal Processing and Control, 46, 121-130, 2018https://doi.org/10.1016/j.bspc.2018.07.010
[Journal paper 118] Bartolomeu, F., Costa, MM., Gomes, JR., Alves, N., Abreu, CS., Silva, FS, Miranda, G. (2018). Implant surface design for improved implant stability–A study on Ti6Al4V dense and cellular structures produced by Selective Laser Melting, Tribology International, 129: 272-282https://doi.org/10.1016/j.triboint.2018.08.012
[Journal paper 119] Augusto, A., Dias, J. R., Campos, M. J., Alves, N. M., Pedrosa, R., & Silva, S. F. (2018). Influence of Codium tomentosum Extract in the Properties of Alginate and Chitosan Edible Films, Foods 2018, 7(4), 53https://doi.org/10.3390/foods7040053
[Journal paper 120] Ângelo DF, Morouço P, Monje Gil F, Mónico L, González-Gárcia R, Sousa R, Neto L, Caldeira I, Smith M, Smith S, Sanz D, Abade Dos Santos F, Pinho M, Carrapiço B, Cavaco S, Moura C, Alves N, Salvado F, Little C, (2018). Preclinical Randomized Controlled Trial of Bilateral Discectomy versus Bilateral Discopexy in Black Merino Sheep temporomandibular Joint: TEMPOJIMS Phase 1 – Histologic, Imaging and Body Weight results, Journal of Cranio-Maxillofacial Surgery 46 (4), 688-696https://doi.org/10.1016/j.jcms.2018.01.006
[Journal paper 121] M Buciumeanu, S Almeida, F Bartolomeu, MM Costa, N Alves, FS Silva and G. Miranda (2018). Ti6Al4V cellular structures impregnated with biomedical PEEK-New material design for improved tribological behaviour, Tribology International 119, 157-164https://doi.org/10.1016/j.triboint.2017.10.038
[Journal paper 122] Mitchell, G. R., Olley, R. H. (2018). Orthogonal Templating Control of the Crystallisation of Poly(E-Caprolactone), Polymers 2018, 10(3), 300https://doi.org/10.3390/polym10030300
[Journal paper 123] Zhong, J., Mohan, S. D., Bell, A., Terry, A., Mitchell, G. R., & Davis, F. J. (2018). Electrospinning of food-grade nanofibres from whey protein, International Journal of Biological Macromolecules, 113(1): 764-773https://doi.org/10.1016/j.ijbiomac.2018.02.113
[Journal paper 124] Mahendra, V., Kariduraganavar, M. Y., Pattanashetti, N. A., & Geoffrey, R. M. (2018). The Coconut Tree – A Source of Sustainable Polymeric Materials, United Journal of Biochemistry and Biotechnology, 1 (1): 1-6https://www.untdprimepub.com/united-journal-of-biochemistry-and-biotechnology/issue1.php
[Journal paper 125] Auriemma, F., De Rosa, C., Di Girolamo, R., Malafronte, A., Scoti, M., Mitchell, G. R., & Esposito, S. (2018). Time-resolving study of stress-induced Transformaations of Isotactic Polypropylene through Wide-Angle X-Ray Scattering Measurements, Polymers 2018, 10(2), 162https://doi.org/10.3390/polym10020162
[Journal paper 126] Geoffrey R Mitchell, Vidhura Mahendra, Dora Sousa (2018). Biopolymers Based on Rosin, Current Research in Biopolymers 1(1), CRBP-102. DOI: 10.29011/CRBP-102. 000002https://www.gavinpublishers.com/journals/issue_article/current-research-in-biopolymers/2018/1
[Journal paper 127] Verónica Schiariti, Egmar Longo, Alexander Shoshmin, Ludmila Kozhushko, Yanina Besstrashnova, Maria Król, Taynah Neri Correia Campos, Haryelle Náryma Confessor Ferreira, Cláudia Verissimo, Daniel Shaba, Matilda Mwale and Sandra Amado (2018). Implementation of the International Classification of Functioning, Disability, and Health (ICF) Core Sets for Children and Youth with Cerebral Palsy: Global Initiatives Promoting Optimal Functioning, International journal of environmental research and public health, 5(9): 1899https://doi.org/10.3390/ijerph15091899
[Journal paper 128] J. F. Horta, F. J. P. Simões, A. Mateus (2018). Large scale additive manufacturing of eco-composites, Int J Mater Form 11, 375–380https://doi.org/10.1007/s12289-017-1364-5
[Journal paper 129] Gray, J. R. A., & Martins-Ferreira, N. (2018). New exactness conditions involving split cubes in protomodular categories, Theory and Applications of Categories, 33(33): 1031-1058http://www.tac.mta.ca/tac/volumes/33/33/33-33abs.html
[Journal paper 130] Martins-Ferreira, N., Montoli, A., & Sobral, M. (2018). The Nine Lemma and the push forward construction for special Schreier extensions of monoids with operations, Semigroup Forum 97: 325–352https://doi.org/10.1007/s00233-018-9962-1
[Journal paper 131] Bakatovich, A., Davydenko, N., Gaspar, F. (2018). Thermal insulating plates produced on the basis of vegetable agricultural waste, Energy & Buildings 180 (1): 72-82https://doi.org/10.1016/j.enbuild.2018.09.032
[Journal paper 132] Pereira, R. F., Sousa, A., Barrias, C. C., Bártolo, P. J., & Granja, P. L. (2018). A single-component hydrogel bioink for bioprinting of bioengineered 3D constructs for dermal tissue engineering, Mater. Horiz., 5: 1100-1111https://doi.org/10.1039/C8MH00525G
[Journal paper 133] JR Dias, S Baptista-Silva, A Sousa, AL Oliveira, PJ Bártolo, PL Granja (2018). Biomechanical performance of hybrid electrospun structures for skin regeneration, Materials Science and Engineering: C, 93: 816-827https://doi.org/10.1016/j.msec.2018.08.050
[Journal paper 134] C. Malca, C. Santos, M. Sena, A. Mateus (2018). Development of SLM cellular structures for injection molds manufacturing, Science and Technology of Materials 30(1): 13-22https://doi.org/10.1016/j.stmat.2018.03.001
[Journal paper 135] Gaspar, F., Cruz, H., & Gomes, A. (2018). Evaluation of glue line shear strength of laminated timber structures using block and core type specimens, Eur. J. Wood Prod. 76: 413–425https://doi.org/10.1007/s00107-017-1217-4
[Journal paper 136] Pereira, R.F., Barrias, C.C., Bártolo, P.J., Granja, P.L. (2018). Cell-instructive pectin hydrogels crosslinked via thiol-norbornene photo-click chemistry for skin tissue engineering, Acta Biomaterialia, 66: 282-293https://doi.org/10.1016/j.actbio.2017.11.016
[Journal paper 137] Pedro G. Morouço, Tiago M. Barbosa, Raul Arellano and João P. Vilas-Boas (2018). Intracyclic Variation of Force and Swimming Performance, International Journal of Sports Physiology and Performance, 13 (7): 897–902https://doi.org/10.1123/ijspp.2017-0223
[Journal paper 138] P Forte, DA Marinho, JE Morais, PG Morouço, TM Barbosa (2018). Estimation of mechanical power and energy cost in elite wheelchair racing by analytical procedures and numerical simulations, Computer Methods in Biomechanics and Biomedical Engineering, 21 (10): 585-592https://doi.org/10.1080/10255842.2018.1502277
[Journal paper 139] P Forte, DA Marinho, JE Morais, PG Morouço, TM Barbosa (2018). The variations on the aerodynamics of a world-ranked wheelchair sprinter in the key-moments of the stroke cycle: A numerical simulation analysis, PloS one 13 (2), e0193658https://doi.org/10.1371/journal.pone.0193658
[Journal paper 140] Teresa Cardoso, Teresa Coimbra, Artur Mateus (2018). Mathematical Analysis and Augmented Reality: A Study in Higher Education in Portugal, Revista Debates em Educação, 10(22)https://doi.org/10.28998/2175-6600.2018v10n22p271-283
[Journal paper 141] F Ramalho, S Franco, F Maia, P Morouço (2018). Proposta de programa de exercício aquático para indivíduos com osteoartrose, Motricidade 14 (2): 140-141http://www.scielo.mec.pt/scielo.php?script=sci_arttext&pid=S1646-107X2018000200017
[Journal paper 142] Vitor Ferreira, Ana Lisboa (2018). Innovation and Entrepreneurship: From Schumpeter to Industry 4.0, Applied Mechanics and Materials 890: 174-180https://doi.org/10.4028/www.scientific.net/AMM.890.174
[Journal paper 143] DF Angelo, F Monje, R Gonzalez, P Morouco, N Alves, F Salvado (2018). Black Merino Sheep: suitable animal model for temporomandibular joint interposal material research, Annals of Medicine 50: S87-S88https://doi.org/10.1080/07853890.2018.1427460
[Journal paper 144] Bartolomeu, F., Buciumeanu, M., Pinto, E., Alves, N., Silva, F., Carvalho, O., Miranda, G. (2017). 316L stainless steel mechanical and tribological behavior—a comparison between selective laser melting, hot pressing and conventional casting, Additive Manufacturing, vol. 16:81-89.https://www.sciencedirect.com/science/article/pii/S2214860416301786
[Journal paper 145] Henrique A.Almeida, Rui B.Ruben (2017). Medical devices: from design to production, Advances in Mechanical Engineering, vol. 9.https://journals.sagepub.com/doi/full/10.1177/1687814017729895
[Journal paper 146] Pedro J. B. F. N. Beirão, Cândida M. S. P. Malça, and Raimundo P. Felismina (2017). Influence of design parameters on the structural and fatigue behaviors of a floating point wave energy converter, AIMS Energy, vol. 5(2):209-223.https://www.aimspress.com/fileOther/PDF/energy/energy-05-00209.pdf
[Journal paper 147] Paula Pascoal-Faria, Carlos Dias, Mónica Oliveira and Nuno Alves (2017). A finite element method to study multimaterial wind towers, AIP Conference Proceedingshttps://aip.scitation.org/doi/abs/10.1063/1.4992666
[Journal paper 148] Nelson Silva, Nuno Alves and Paula Pascoal-Faria (2017). Global optimization framework for solar building design, AIP Conference Proceedingshttps://aip.scitation.org/doi/10.1063/1.4992670
[Journal paper 149] N. Martins-Ferreira, A. Montoli (2017). On the “Smith is Huq” Condition in S-Protomodular Categories, Applied Categorical Structures, vol. 25(1):59-75https://link.springer.com/article/10.1007/s10485-015-9411-1
[Journal paper 150] N. Martins-Ferreira (2017). Normalized Bicategories Internal to Groups and more General Mal’tsev Categories, Applied Categorical Structures, vol. 25https://link.springer.com/article/10.1007/s10485-017-9486-y
[Journal paper 151] Araújo, S. Barbeiro, M. Khaksar Ghalati (2017). Stability of a leap-frog discontinuous Galerkin method for time-domain Maxwell’s equations in anisotropic materials, Communications in Computational Physics, vol. 21(5):1350–1375https://ui.adsabs.harvard.edu/abs/2017CCoPh..21.1350A/abstract
[Journal paper 152] S.R.M. Coelho, P.N.B. Reis, J.A.M. Ferreira, A.M. Pereira (2017). Effects of external patch configuration on repaired composite laminates subjected to multi-impacts joints, Composite Structures, vol. 168https://doi.org/10.1016/j.compstruct.2017.02.069
[Journal paper 153] JR Dias, S Baptista-Silva, CMT de Oliveira, A Sousa, AL Oliveira, PJ Bártolo, PL Granja, (2017). In situ crosslinked electrospun gelatin nanofibers for skin regeneration, European Polymer Journal, vol. 95https://doi.org/10.1016/j.eurpolymj.2017.08.015
[Journal paper 154] Morouço, P., Lattanzi, W., & Alves, N. (2017). Four-dimensional bioprinting as a new era for tissue engineering and regenerative medicine, Frontiers in Bioengineering and Biotechnology, vol. 5:61https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5650983/
[Journal paper 155] D. F. Almeida, Rui B. Ruben, J. Folgado, P.R. Fernandes, J. Gameias, B. Verhegghe, M. De Beule (2017). Automated femoral landmark extraction for optimal prosthesis placement in total hip arthroplasty, International Journal for numerical Methods in Biomedical Engineering, vol. 33https://pubmed.ncbi.nlm.nih.gov/27781402/
[Journal paper 156] Dias J R, dos Santos C, Horta J, et al. (2017). A new design of an electrospinning apparatus for tissue engineering applications, International Journal of Bioprintinghttp://dx.doi.org/10.18063/IJB.2017.02.002
[Journal paper 157] J. F. Horta, F. J. P. Simões, A. Mateus (2017). Large scale additive manufacturing of eco-composites, International journal of Material Forminghttps://www.springerprofessional.de/large-scale-additive-manufacturing-of-eco-composites/12463852
[Journal paper 158] J.C.Dinis, T.F.Moraes, P.H.J.Amorim, O.H.J.Amorim, J.V.L.Silva, Rui B.Ruben (2017). An open-source GUI application for segment foetal ultrasound images, International Journal of Signal and Imaging Systems Engineering, vol. 10https://www.inderscience.com/info/inarticle.php?artid=87770
[Journal paper 159] Morouço, P., Barbosa, T., Arellano, R., & Vilas-Boas, J.P. (2017). Intra-cyclic variation of force and swimming performance, International Journal of Sports Physiology and Performancehttps://pubmed.ncbi.nlm.nih.gov/29283692/
[Journal paper 160] David Ângelo, Florencio Monje, Raúl González-García, Christopher Little, Lisete Mónico, Mário Pinho, Fábio Santos, Belmira Carrapiço, Sandra Gonçalves, Pedro Morouço, Nuno Alves, Carla Moura, Yadong Wang, Eric Jeffries, Jin Gao, Rita Sousa, Lia Neto, Dani (2017). Bioengineered Temporomandibular Joint Disk Implants: Study Protocol for a Two-Phase Exploratory Randomized Preclinical Pilot Trial in 18 Black Merino Sheep (TEMPOJIMS), JMIR Research Protocolshttps://pubmed.ncbi.nlm.nih.gov/28254733/
[Journal paper 161] Morouço, P; Fernandes, C. (2017). Exercise, Tissue Engineering and Osteoarthritis: a stimulating triad, Journal of Aging Studies and Therapieshttps://www.hindawi.com/journals/jar/2019/1935806/
[Journal paper 162] Z. Janelidze and N. Martins-Ferreira (2017). Involution-rigidness — a new exactness property, and its weak version, Journal of Algebra and its Applications, vol. 16https://www.worldscientific.com/doi/abs/10.1142/S0219498817500748
[Journal paper 163] N. Martins-Ferreira, A. Montoli, A. Ursini and T. Van der Linden (2017). What is an ideal a zero-class of?, Journal of Algebra and its Applicationshttps://www.worldscientific.com/doi/abs/10.1142/S0219498817500499
[Journal paper 164] J Ribeiro, AR Caseiro, T Pereira, PAS Armada-da-Silva, I Pires, J Prada, I Amorim, I Leal Reis, S Amado, JD Santos, S Bompasso, S Raimondo, ASP Varejão, S Geuna, AL Luís, AC Maurício (2017). Evaluation of PVA biodegradable electric conductive membranes for nerve regeneration in axonotmesis injuries – the rat sciatic nerve animal model, Journal of Biomedical Materials Research: Part Ahttps://pubmed.ncbi.nlm.nih.gov/28078802/
[Journal paper 165] Ângelo, D. F., Monje, F., González, R., Monico, L., Moura, C., Francisco, L., Sanz, D., Alves, N., Salvado, F. & Morouço, P. (2017). Effects of bilateral discectomy and bilateral discopexy on Black Merino Sheep rumination kinematics: TEMPOJIMS-pilot blinded, randomized preclinical study, Journal of Cranio-Maxillo-Facial Surgeryhttps://pubmed.ncbi.nlm.nih.gov/29277250/
[Journal paper 166] Amaro, N., Morouço, P., Marques, M., Fernandes, R., & Marinho, D. (2017). Biomechanical and bioenergetical evaluation of swimmers using fully-tethered swimming: A qualitative review, Journal of Human Sport and Exercisehttps://doi.org/10.14198/jhse.2017.124.20
[Journal paper 167] Amaro, N. M., Marinho, D. A., Marques, M. C., Batalha, N. P., & Morouço, P. G. (2017). Effects of dry-land strength and conditioning programs in age group swimmers, Journal of Strength and Conditioning Researchhttps://pubmed.ncbi.nlm.nih.gov/28825604/
[Journal paper 168] F. Bartolomeu, M. Sampaio, O. Carvalho, E. Pinto, N. Alves, J.R. Gomes, F.S. Silva, G. Miranda (2017). Tribological behavior of Ti6Al4V cellular structures produced by Selective Laser Melting, Journal of the mechanical behavior of biomedical materials, vol. 69https://www.sciencedirect.com/science/article/abs/pii/S1751616117300048
[Journal paper 169] Morouço, P. (2017). Biofabrication for cartilage regeneration: engineering biomaterials and printing processes, Journal of Tissue Science and Engineering [Journal paper 170] Morouço, P. (2017). Biofabrication in tissue engineering: Current and future trends, Journal of Tissue Science and Engineering [Journal paper 171] N. Martins-Ferreira, A. Montoli and M. Sobral (2017). On some categorical-algebraic conditions in S-protomodular categories, Logical Methods in Computer Science, vol. 13https://lmcs.episciences.org/3893
[Journal paper 172] Finizia Auriemma, Claudio De Rosa, Rocco Di Girolamo, Anna Malafronte, Miriam Scoti, Geoffrey R Mitchell, Simona Esposito (2017). Deformation of Stereoirregular Isotactic Polypropylene across Length Scales. Influence of Temperature, Macromolecules, vol. 50(7):2856-2870https://pubs.acs.org/doi/10.1021/acs.macromol.7b00045
[Journal paper 173] Morouço, P., Mateus, A., & Alves, N. (2017). A novel hybrid additive manufacturing system for cartilage regeneration, Motricidade [Journal paper 174] Silva, R., & Morouço, P (2017). Avaliação das características antropométricas e capacidades físicas ao longo de uma época desportiva em futebol: comparação entre sub-15, sub-17 e sub-19, Motricidadehttp://www.scielo.mec.pt/scielo.php?script=sci_abstract&pid=S1646-107X2017000100005&lng=pt&nrm=iso
[Journal paper 175] Forte, P., Marinho, D. A., Morais, J. E., Morouço, P., & Barbosa, T. M. (2017). CFD comparison of friction and pressure drag between road and time trial helmets for wheelchair racing, Motricidade [Journal paper 176] Amaro, N., Marinho, D. A., Marques, M. C., Batalha, N., & Morouço, P. G. (2017). Swimming performance and dry-land upper limbs strength in age group swimmers, Motricidade [Journal paper 177] Amaro, N., Marinho, D. A., Marques, M. C., Batalha, N., & Morouço, P. G. (2017). Swimming performance and tethered swimming in male age group swimmers, Motricidade [Journal paper 178] Amaro, N., Marinho, D., Marques, M., Batalha, N., & Morouço, P. (2017). Dry-land strength and conditioning for prepubertal and peripubertal swimmers, NSCA coachhttp://hdl.handle.net/10400.8/2610
[Journal paper 179] Brites F., Malça C., Gaspar F., Franco M., Fonseca A. R., Biscaia S., Mateus A. (2017). Cork Plastic Composite Optimization for 3D Printing Applications, Procedia Manufacturing, vol. 12https://www.sciencedirect.com/science/article/pii/S2351978917306091
[Journal paper 180] Biscaia S., Dabrowska E., Tojeira A., Horta J., Carreira P., Morouço P., Mateus A., Alves N. (2017). Development of heterogeneous structures with Polycaprolactone-Alginate using a new 3D printing system – BioMEDbeta: design and processing, Procedia Manufacturing, vol. 12https://doi.org/10.1016/j.promfg.2017.08.015
[Journal paper 181] João Carlos Silva, Carla Sofia Moura, Nuno Alves, Joaquim Manuel Sampaio Cabral, Frederico Castelo Ferreira (2017). Effects of different fibre alignments and bioactive coatings on mesenchymal stem/stromal cell adhesion and proliferation in poly(ε-caprolactone) scaffolds towards cartilage repair, Procedia Manufacturing, vol. 12https://www.sciencedirect.com/science/article/pii/S2351978917306236
[Journal paper 182] Simão, L., Lisboa, A. (2017). Green Marketing and Green Brand–The Toyota Case, Procedia Manufacturing, vol. 12:183-194https://doi.org/10.1016/j.promfg.2017.08.023
[Journal paper 183] M. Figueiredo, A.M. Pereira (2017). Managing Knowledge – The Importance of Databases in the Scientific Production, Procedia Manufacturing, vol. 12:166-173https://doi.org/10.1016/j.promfg.2017.08.021
[Journal paper 184] G. R. Mitchell, P. Carreira, s. Gomes, A. Mateus, S. Mohan (2017). Morphology Development During Micro Injection Moulding of Thermoplastics, Procedia Manufacturinghttps://www.sciencedirect.com/science/article/pii/S2351978917306169
[Journal paper 185] J.F. Horta, F.J.P.Simões, A.Mateus (2017). Study of Wood-Plastic Composites with reused HDPE and sawdust, Procedia Manufacturinghttps://www.sciencedirect.com/science/article/pii/S2351978917306157
[Journal paper 186] D. Oliveira, A. Mateus, P. Carreira, F. Simões, C. Malça (2017). Water Assisted Injection Molding for Single and Multi-branched Tubular Components, Procedia Manufacturing, vol. 12https://www.sciencedirect.com/science/article/pii/S2351978917306078
[Journal paper 187] G. Mitchell, A. Mateus, Fred Davis, S. Mohan, T. Gkourmpis, T.Youngs (2017). New Tools for Understanding Complex Polymer Behaviour, Procedia Manufacturing, vol. 12:280-290https://www.sciencedirect.com/science/article/pii/S2351978917306200
[Journal paper 188] M. Silva, A.M. Pereira, N. Alves, A. Mateus, C. Malça (2017). A hybrid processing approach to the manufacturing of polyamide reinforced parts with carbon fibers, Procedia Manufacturinghttps://www.sciencedirect.com/science/article/pii/S2351978917306133
[Journal paper 189] N. Martins-Ferreira (2017). An Image Segmentation Procedure based on the Superposition Principle of Quantum Mechanics, Procedia Manufacturing, vol. 12https://www.sciencedirect.com/science/article/pii/S2351978917306182
[Journal paper 190] M.S.N. Figueiredo, A.M. Pereira (2017). Managing Knowledge – the importance of databases in the scientific, Procedia Manufacturinghttps://www.sciencedirect.com/science/article/pii/S2351978917306108
[Journal paper 191] Franco M.C., Fonseca A.R., Sacramento J., Melo B., Conde S.V., Guarino M.P (2017). Micro computed tomography detects changes in liver density in control and in prediabetes rats, Procedia Manufacturinghttps://www.sciencedirect.com/science/article/pii/S2351978917306030
[Journal paper 192] Francisco, L., Moura, C., Viana, T., Ângelo, D., Morouço, P., & Alves, N. (2017). Poly (E-caprolactone) and Polyethylene Glycol Diacrylate-based Scaffolds for TMJ Bioengineered Disc Implants, Procedia Manufacturing, vol. 12https://www.sciencedirect.com/science/article/pii/S2351978917306212
[Journal paper 193] C. Santos, A. Mateus, A. Mendes and C. Malça (2017). Processing and Characterization of thin wall and biodegradable injected pots, Procedia Manufacturing, vol. 12https://www.sciencedirect.com/science/article/pii/S2351978917306029
[Journal paper 194] Almarza AJ, Brown BN, Arzi B, Ângelo DF, Chung W, Badylak SF, Detamore M (2017). Preclinical Animal Models for Temporomandibular Joint Tissue Engineering, Tissue Engineering Part Bhttps://pubmed.ncbi.nlm.nih.gov/29121815/
[Journal paper 195] Bartolomeu, F., Buciumeanu, M., Pinto, E., Alves, N., Silva, F., Carvalho, O., Miranda, G. (2017). Wear behavior of Ti6Al4V biomedical alloys processed by selective laser melting, hot pressing and conventional casting, Transactions of Nonferrous Metals Society of China, vol. 27:829-838https://www.sciencedirect.com/science/article/abs/pii/S1003632617600608
PAPERS IN NATIONAL JOURNALS
[National paper 1] Silva, R., & Morouço, P. (2017). Evaluation of anthropometric characteristics and physical abilities in a soccer season: comparison between U-15, U-17 and U-19, Revista Motricidade, vol. 13(1): 38-49http://dx.doi.org/10.6063/motricidade.7573
[National paper 2] N. Martins-Ferreira (2017). Quaternion Rotations and its applications, Scripta-Ingenia, vol. 8: 20-24.PAPERS IN CONFERENCE PROCEEDINGS
Under Updating…
JOURNAL SPECIAL ISSUES
Under Updating…
AWARDED PATENTS
Under Updating…